WRX WALL PRIMER PAINT 5L WHITE
Water-based, acrylic emulsion-based, silicone interior primer. It can be applied on any interior structural elements which are prepared for priming.
PREPARATION
For best results, make sure surfaces to be painted are sound, clean and dry. Remove any loose or flaking material. Repair damaged areas. Glossy surfaces should be sanded down to provide a key. Wear a suitable mask if dry sanding. Avoid the inhalation of dust Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead.
SPECIFICATIONS
It penetrates the surfaces deeply and creates solid surfaces onto which the paint can hold on. It reduces topcoat paint consumption by saturating the raw surfaces as it is reinforced. It does not prevent the wall from breathing, thanks to the porous composition. It has a high vapour permeability. It penetrates and reinforces the surface. It prevents premature drying. It eliminates colour ripples which are likely to occur in topcoat paint on the surfaces with a different absorbing capacity. It has a high covering power, thus reduces the paint consumption and labour in colour conversion for previously painted surfaces. Particularly, it prevents different textures formed on repaired surfaces, from being seen on the topcoat paint. It eliminates colour ripples caused by any difference in the texture. It allows the new water-based paint to adhere to the old solvent-based paint layer.
APPLICATION
Do not apply in damp or humid conditions or room temperatures below 10°C. Stir well before use. Ready to use. It can be thinned with maximum of 5% water, if required. Suitable for application by brush or roller. For best results, load the brush generously. The primer should be applied in single coat by following the shade.
COVERAGE
WRX Primer will cover approximately 23-35 square metres per litre depending on the surface.
DRYING TIME
Touch dry in an hour under normal conditions. Allow 6 hours between coats. Through dry is 24 hours.
PREPARATION
For best results, make sure surfaces to be painted are sound, clean and dry. Remove any loose or flaking material. Repair damaged areas. Glossy surfaces should be sanded down to provide a key. Wear a suitable mask if dry sanding. Avoid the inhalation of dust Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead.
SPECIFICATIONS
It penetrates the surfaces deeply and creates solid surfaces onto which the paint can hold on. It reduces topcoat paint consumption by saturating the raw surfaces as it is reinforced. It does not prevent the wall from breathing, thanks to the porous composition. It has a high vapour permeability. It penetrates and reinforces the surface. It prevents premature drying. It eliminates colour ripples which are likely to occur in topcoat paint on the surfaces with a different absorbing capacity. It has a high covering power, thus reduces the paint consumption and labour in colour conversion for previously painted surfaces. Particularly, it prevents different textures formed on repaired surfaces, from being seen on the topcoat paint. It eliminates colour ripples caused by any difference in the texture. It allows the new water-based paint to adhere to the old solvent-based paint layer.
APPLICATION
Do not apply in damp or humid conditions or room temperatures below 10°C. Stir well before use. Ready to use. It can be thinned with maximum of 5% water, if required. Suitable for application by brush or roller. For best results, load the brush generously. The primer should be applied in single coat by following the shade.
COVERAGE
WRX Primer will cover approximately 23-35 square metres per litre depending on the surface.
DRYING TIME
Touch dry in an hour under normal conditions. Allow 6 hours between coats. Through dry is 24 hours.
Reviews
Customer Reviews
This product has not yet been reviewed.
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend