POLYVINE HEAVY DUTY EXTREME VARNISH SATIN 100ML

The strongest of all ‘one pack’ varnishes that dries in minutes and cures in 16 hours to protect interior and exterior surfaces

New water-based crosslinked polyurethane with advanced resin technology brings the highest protection from a single pack varnish ever developed.

For the ultimate protection of interior and exterior surfaces to an industrial level of finish.

The UV blocking and absorption reduce greying, aging and deterioration of surfaces. Whilst Biocides protect against mildew, mould and fungus.


Preparation

Remove all traces of old finishes, dirt, oil, wax and grease. These may have impregnated the surface and can cause failure. Sand in direction of the grain to provide a key. Thoroughly clean after sanding. Instructions in the technical data sheet must be followed. Ensure the product is well mixed but do not shake.

Application

Apply 2 to 3 coats of varnish, with a good quality brush. On new softwood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain.

For a dead flat finish with high durability and stain resistance, apply two coats of satin followed by one of dead flat.