MASONRY PAINT 500ML MATT BLACK

Rustin’s Quick Dry Masonry Paint is a quick drying high-performance paint that dries to a smooth matt finish. For interior and exterior use on masonry applications such as walls, cement, stone, tiles and bricks.

Preparation Coverage

14 square metres per litre per coat depending on the absorbency and texture of the surface being treated.
The surface must be clean, dry and free from dust and any loose paint, dirt, fungal growth or solid matter likely to interfere with the adhesion of the paint. If the surface has been previously painted, then apply to a small area to ensure that it is compatible.

Do not apply to damp areas. Sources of damp should be eliminated before applying the paint.

STIR WELL BEFORE USE. Do not thin the product. Apply evenly by brush or roller. Two coats should be applied allowing 2-3 hours between coats in warm dry conditions.

Cold damp conditions will significantly extend the drying times. Do not use below 10ºC, in damp conditions or if rain is imminent.

The paint will be touch dry in approximately 30 minutes depending on temperature and humidity and can be re coated after 2-3 hours.

Cleaning .
Remove as much paint as possible and return to this container. Brushes should then be cleaned immediately with water. If the brushes become hard, they may be cleaned with Rustin’s Brush Restorer or Rustin’s Cellulose Thinners.