RUSTINS OIL WHITE WOOD PRIMER 500ML

PRODUCT DATA SHEET

Product White Primer
Type Oil based white wood primer
Intended Use
Applied directly to bare wood. Seals surface and provides adhesion for subsequent coats of
paint.
Special Features Suitable for interior and exterior use.
Preparation
Wooden surfaces to be primed must be dry, clean, smooth and free from dust, oil, grease,
wax and other contaminants likely to affect adhesion. All knots should be sealed with
Rustin’s Knotting before priming.
Application
STIR THOROUGHLY BEFORE USE. The first coat may be thinned with 10% white spirit if
necessary. After priming, holes and cracks may be filled with Rustin’s Wood Filler.
Coats 1 or 2 coats depending on requirements.
Drying Time The primer is touch dry within 2-4 hours depending on temperature and humidity.
Re-coating Time Allow to dry for 12 hours or overnight before applying undercoat.
Application Temp. Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity.
Coverage 3.75 sq metres per tin per coat depending on the absorbency of the surface.
Maintenance Must be over coated with an undercoat.
Compatibility All types of paint.
Settlement STIR WELL BEFORE USE.
Shelf-life/Storage A very long time if stored in a cool dry place firmly sealed.
Hazards
Flammable. Keep out of reach of children. Keep away from sources of ignition- no smoking.
Avoid contact with skin and eyes. Use only in well ventilated areas. A full Safety Data Sheet is
available upon request or on www.rustins.co.uk
Clean-Up
Use White Spirit or Rustin’s Brush Cleaner whilst still wet. If dried on, clean equipment and
brushes with Rustin’s Brush Restorer