MARDOM FIX EXTRA JOINT ADHESIVE

Mardom Fix Extra is a solvent-free, universal polyurethane-based mounting adhesive. It is perfect for creating stable and durable joints of stucco made of ProFoam. The product has a striped consistency and is colorless, which ensures excellent adhesion to the surface, does not flow and is perfect for difficult connections, e.g. elements with irregular shapes, such as richly ornamented decorative strips.

Mardom Fix Extra is a transparent, universal construction adhesive. Perfect for joining Mardom Decor stucco elements made of ProFoam polyurethane material. It can be successfully used on all surfaces – thanks to its high density, it retains high adhesion to the material and does not flow from the glued surface. When using the product, follow standard occupational hygiene practices and wear gloves. It should not be used in closed rooms with very poor ventilation, except for the use of appropriate respiratory protection in the form of a protective mask. The adhesive can be used indoors in rooms exposed to high relative humidity and outdoors in situations of direct exposure to weather conditions. It is intended for mounting surfaces such as:

Connecting decorative strips and stucco elements made of ProFoam
Bonding of wooden structural elements
Concrete, stone and other materials commonly used in construction
Bonding of insulating materials (including polystyrene)
Mardom Fix Extra is perfect for joining porous and non-porous surfaces. The adhesive hardens under the influence of moisture from the air or the materials being attached. During the assembly process, you can leave it to dry on its own or lightly spray the gluing surface with water to speed up the polyurethane binding and drying process. When solidifying, Fix Pro gently foams, thanks to which it has excellent filling properties. We recommend using the product with a dedicated glue gun. Apply the appropriate amount of glue to one of the joined elements, place it together and press it together. Joining should be done within 15 minutes of applying the adhesive to the surface. Then leave to dry completely – at least 1 hour.

For best results, we recommend appropriate surface preparation before gluing. The wall should be free of grease, dusted, dry, stable and free from peeling paint and crumbling plaster.

Advantages of Mardom Fix Extra:

Rapid build-up of strength
Filling properties (foam formation)
Suitable for gluing uneven surfaces
Water resistance (EN204) D4
Use acetone or a synthetic thinner to clean the product from stucco or tool surfaces.

Usage limitation:

Do not use the following materials for fastening: PE, PP, PTFE

Mardom Fix Pro – designed for fixing products made of PolyForce and ProFoam. Particularly recommended for mounting floor strips, stucco and decorative elements mounted on walls, including wall panels and lamellas, as well as ceiling strips. It is also perfect for connecting elements made of PolyForce and masking small installation irregularities along the wall line. Drying time up to several hours.

Mardom Max – very strong glue with a short setting time. It ensures high installation stability even in problematic spaces. Perfect for attaching stucco and decorative elements to surfaces. Can be used with both PolyForce and ProFoam materials. The drying time is only a few seconds, so it is perfect for attaching curtain systems and stucco elements to furniture.

Mardom Fix Extra – transparent adhesive dedicated to use with ProFoam material. Perfect for joining strips or decorative corners.

All profiles are non-stock items. Delivery will be 5 - 10 working days.